Product Care

Maintenance

Save your receipt to have a record of Tropitone model numbers purchased, as you may wish to add accessories, update your fabric, or expand your collection during your ownership of Tropitone furniture! Your sales receipt will be required to review any warranty claim.

Regular periodic care of your Tropitone furniture will maintain its appearance and functionality better than occasional, heavy duty maintenance. Consider the specific conditions and usage to which your product is exposed so appropriate maintenance is provided.

Mildew can form on dirt or other substances deposited upon the fabric. Regular cleaning of outdoor furniture will help to prevent its forming.

Please read the Safety, Care & Maintenance and Warranty booklet carefully and in its entirety. Contact your Retail Dealer or Commercial Representative if you have additional questions.

Click on a title below to view PDF or Video file:
To read PDF instructions, you may need the current version of Adobe Acrobat Reader, which can be downloaded at http://www.adobe.com.

Video

• How To Touch Up a Tropitone® Stoneworks® Table Top

 
PDF

• Caps, Clips, Glides, and Grommet Pictures
• Safety, Care, Maintenance And Warranty Information
• Troubleshooting Guide For Fire Pits And Fire Tables

Vinyl

Tropitone uses only the finest, heavy-gauge virgin vinyl with added mildew inhibitors and ultraviolet stabilizers. We require a specific vinyl thickness and hardness durometer for durability and "memory". (The “memory” of the vinyl is its ability to return to the original shape after use.) Our vinyl is formulated to provide years of service. The proprietary material that formulates our EZ Span™ segments also must meet these same material requirements.

Straps, Lacing and EZ Span™ Segments

Vinyl straps, lacing and EZ Span™ segments must be cleaned frequently with a sponge or soft bristle brush using a cleaning solution with 1/4 cup (2 oz.) mild liquid soap in a gallon of lukewarm water (100° F / 38° C). Rinse thoroughly.

In geographical areas with high concentrations of acid rain, fog and/or smog, vinyl must be cleaned monthly with a lukewarm water and ammonia mixture. Use three parts water to one part ammonia. Rinse thoroughly.

For furniture with woven straps or lacing, be sure to lift and clean beneath the strap and/or lace intersections. Commercial casual furniture cleaners will help lift embedded dirt and oil from vinyl and are available at leading casual furniture dealers. EZ Span™ segments have a slight texture; the segments may be cleaned lightly with a non-scratch scrub sponge or soft bristle brush to lift embedded dirt.

Caution: Do NOT use abrasive cleaners on vinyl straps, lacing or EZ Span™ segments.

Caution: Certain suntan and sun block products contain "PABA". PABA is harmful to vinyl and can permanently discolor it; therefore, contact with vinyl straps or lacing should be avoided. If contact is made, cleaning the vinyl immediately with a non-abrasive, mild soap and water solution followed by a fresh water rinse may minimize the possibility of discoloration. Laying a beach towel over the vinyl straps of outdoor furniture whenever you are using the furniture will help protect the vinyl from the discoloring effects of PABA.

Replacing EZ Span™ Segments

Tropitone EZ Span™ segments can be replaced to repair or update the look of your furniture — in some cases multiple colors are installed to enhance the look. Simply order segments in the style and color you desire from your local Tropitone Dealer or Representative.

Replacing Straps and Lacing

Most Tropitone furniture can be restrapped at home or on site, by your local Tropitone Dealer or Representative, or at a recommended repair center. Simply order the color and number of pre-cut straps needed from your local Tropitone Dealer or Representative. Tropitone has two methods of attaching a strap: the "rivet style" uses a nylon rivet inserted through a hole in the strap and pressed into a corresponding hole in the frame, the “slot style” utilizes a tab configuration on the strap end which fits into a slot punched in the frame. When ordering straps, be sure to give the chair name and number, vinyl color, and the strap type: rivet style or slot style. New nylon rivets will be included with a "rivet style" strap order.

Tables

Tropitone leads the industry in offering table surface options: Acrylic, Clear Glass, Smoked Glass, Textured Glass, Stoneworks™ Collections, Cast Aluminum, Patterned Aluminum and Natural Stone products. Many of these are available with holes to accommodate the use of an umbrella.

Click on a title below to view PDF or Video file:
To read PDF instructions, you may need the current version of Adobe Acrobat Reader, which can be downloaded at http://www.adobe.com.

Video

• How To Touch Up a Tropitone Stoneworks Table Top
• How To Replace a Tropitone Table Top
• How To Assemble a Tropitone Table

PDF

• 120 x 55 Table Assembly Instructions
• Arazzo & Linea 84" Table Assembly Instructions
• Arazzo & Linea 48", 54", 60" Table Assembly Instructions
• Banchetto 66” x 42” KD Bar Height Table Base Assembly
• Cast Pedestal Umbrella / Table Base Assembly Instructions
• Crestwood Accessory Table Assembly Instructions
• Crestwood Rectangular Assembly Instructions
• Crestwood Round Assembly Instructions
• Curve Table Assembly Instructions
• Evo Pedestal Table Top Attachment
• KD Table Assembly Instructions
• Matrix Table Assembly Instructions
• Natural Stone & Patterned Top Attachment For 5910xx and 5916xx Tables
• Stoneworks Top Flat Bottom Attachment Assembly Instructions
• Slat KD Tables Instructions
• Stoneworks Touch Up Instructions
• Waste Receptacle Assembly Instructions
• Waste Receptacle & Ash Urn Assembly Instructions (District)

Acrylic Table Tops

Avoid build-up of grease and stains by washing regularly with a cleaning solution with 1/4 cup (2 oz.) mild liquid soap in a gallon of lukewarm water (100° F / 38° C). Rinse thoroughly with clean water.

Hint: Occasional use of a high grade automotive paste wax will help keep the acrylic table looking new.

• Do not use window cleaners or products containing ammonia or solvents on acrylic tops.
• Do not use plastic covers over acrylic table tops. The resulting heat accumulation may cause the acrylic to bow.

Cast Aluminum Table Tops and Aluminum Frames

See Painted Finishes in the Cleaning and Care section.

Fiberglass Table Tops

Use a glass cleaner with ammonia.

Glass Table Tops

Use a glass cleaner with ammonia.

Stoneworks™ Solid Surface Table Tops

Avoid build-up of grease and stains by washing regularly with a non-abrasive sponge or soft bristle brush with a cleaning solution with 1/4 cup (2 oz.) mild liquid soap in a gallon of lukewarm water (100° F / 38° C). To release embedded dirt, use a vinegar and water solution (equal parts each). Rinse thoroughly with clean water.

Natural Stone Table Tops

Routine Care

• Clean spills immediately
• Use a soft cloth to wipe stone
• Use coasters
• Only use products labeled for natural stone cleaning
• Protect stone surface from hot items

To clean granite, marble and travertine, apply the natural stone cleaner to the stone surface. FOLLOW THE MANUFACTURER’S INSTRUCTIONS.

Wipe off with a soft, absorbent cloth. For heavily soiled areas, allow cleaner to stand for about one minute before wiping off.

Caution: Alcohol or acid (from coffee, wine, orange juice, tomato juice, lemon, etc.) can etch stone sealer and natural stone if not cleaned up promptly. This will promote staining.

Caution:, The following should NOT be used to clean natural stone - damage may occur:

• Bleach or cleaners with bleach
• Glass cleaners
• Vinegar
• Ammonia
• Cleaners containing lemon or orange
• Abrasive powders or liquids
• Scouring pad or scrubbing sponge

Note: If a detergent is used on stone surface, a soap film will develop. Clean with a stone cleaner to remove the soap film.

If liquids darken or discolor the stone surface, sealer recoating is necessary immediately. See the Natural Stone Sealing section below.

Natural Stone Sealing

Sealing with quality stone care products will help to protect the granite, marble or travertine from absorbing liquids and staining. In a residential setting, sealing on a semi-annual (twice yearly) basis should be sufficient. In a commercial environment, more frequent sealing will be needed.

Sun exposure and other factors increase sealing frequency. If liquids darken or discolor the stone surface, sealer recoating is necessary immediately. Test by allowing water to remain for ten (10) minutes and observing the stone surface. If the stone darkens or absorbs the liquid, immediate sealing is needed.

FOLLOWING THE MANUFACTURER’S NATURAL STONE SEALER INSTRUCTIONS IS CRITICAL FOR GOOD RESULT. Sealing with a penetrating (or impregnating) sealer will provide a protective coating to stand up to the daily use of stone cleaners, and normal exposure to liquids while minimizing opportunity for liquids and stains to penetrate the stone. Multiple coats of sealer may be needed on porous stone. Repeat penetrating sealer application until sealer isn’t absorbed by the stone.

When sealing the stone, protect stainless steel frames from the sealer. If the sealer contacts the stainless steel, immediately rinse the stainless steel with clean water, and dry thoroughly. Sealer will prevent the metal from "breathing", and promote corrosion.

Should your natural stone incur a stain, contact a local stone resource for products and guidance regarding stain removal. Stain removal is difficult – in some cases, only fading of the stain will be achieved. It is far better to prevent stains with proper cleaning and sealing.

Stoneworks™ Touch-up

Tropitone offers touch up kits for Stoneworks table tops.. Orders may be placed with your local authorized Tropitone Dealer or commercial Sales Representative.

Replacing Acrylic or Glass Table Top

Acrylic and glass table tops feature "Easy-On/Easy-Off" clips to remove the table top.

Umbrella Hole Grommets

Any table top with an umbrella hole should have a grommet; acrylic tops must use a vinyl grommet around the circumference of the hole to protect it from breakage. Umbrella hole grommets are available from your local Tropitone Dealer or Representative.

Fabrics

All of our fabrics for slings, cushions and umbrellas are designed and constructed for outdoor use and are formulated to withstand the elements. All dry quickly, contain mildew inhibitors and are stain resistant. Please note that proper care will extend the life of the fabric.

All of our cushions are water-resistant and feature quality polyester fill and/or foam that is designed to dry quickly. Our outdoor cushions are constructed of fabrics containing UV and Mildew Inhibitors. Additionally, each cushion is constructed of a mildew-resistant core of self-draining fills, which is then wrapped in a water resistant covering. Very little water will enter into the cushion, but what does can quickly drain by standing the cushion on its side.

Tropitone’s “tight seat” cushions were created to be weather resistant, using outdoor grade materials and utilizing a moisture barrier beneath the fabric covering. All removable pads and lounge cushions will quickly drain water by standing the cushion on its side.

All Tropitone fabrics, fill and foam are flame retardant, meeting fire code rating CA117.

CLEANING AND CARE

Regular periodic care of your Tropitone furniture will maintain its appearance and functionality better than occasional, heavy duty maintenance. Consider the specific conditions and usage to which your product is exposed so appropriate maintenance is provided. Product failure caused by a lack of reasonable and necessary care and maintenance is not covered by the product warranty.

The life of your patio furniture fabric largely depends on its care. Clean all spills promptly. Fabric life can be extended by simply rinsing down the patio furniture regularly with water. Certain suntan and sun block products may permanently discolor any fabric. This possibility can be minimized by immediately cleaning after contact. In addition, storing the cushions when not in use will extend cushion life.

Prepare a cleaning solution with 1/4 cup (2 oz.) mild liquid soap in a gallon of lukewarm water (no warmer than 100° F / 38° C). Clean fabric with the solution using a sponge or soft bristle brush. Rinse thoroughly with clean water. Allow to air dry.

Hint: Standing a cushion on its side will help it drain faster.

Caution: Certain suntan and sun block products contain "PABA". PABA is harmful to fabric and can permanently discolor it; therefore, contact with cushions or slings should be avoided. If contact is made, cleaning the fabric immediately with a non-abrasive, mild soap and water solution followed by a fresh water rinse may minimize the possibility of discoloration. Laying a beach towel over the cushions or slings of outdoor furniture whenever you are using the furniture will prolong the fabric life.

• Do not use a bleach solution unless specifically listed as a cleaning agent for the specific fabric, such as for solution dyed acrylics.
• Do not submerse or allow cushions to lie in standing water.
• Do not put cushions into the dryer.
• Do not use harsh detergents or stiff bristle brushes.
• Do not use Pine Oil cleaners or abrasive household cleaners.
• Do not use heat or hot water.

Mildew may form on dirt or other substances deposited upon the fabric. Regular cleaning of the furniture will help to prevent its forming. If mildew does develop, add 1 cup bleach to the cleaning solution. Apply to the affected area and allow to soak in. Scrub with a soft bristle brush, then rinse thoroughly. Repeat if necessary. For stubborn mildew stains, use a household mildew remover - test in an inconspicuous location first. FOLLOW THE MANUFACTURER’S INSTRUCTIONS.

FAUX LEATHER

Clean all spills promptly. For a quick, easy clean up - use baby wipes. For general cleaning, see the instructions in the FABRIC section.

REPLACING CUSHIONS

Cushions can be replaced to update the appearance of your Tropitone furniture and beautify your outdoor living areas. Tropitone offers replacement cushions to match all current and many discontinued frame styles. You may select cushion fabric from our extensive fabric offering, or we can use your own material. All our cushions feature quality polyester fill and/or foam that is designed to dry quickly. Contact your local Tropitone Dealer or Representative for cushion styles, fabric selection and pricing. To purchase, you will need to know the model numbers for the pieces on which you want to replace cushions. Refer to your original sales receipt for this information.

REPLACING SLINGS

Slings can be replaced to create a fresh look or to repair your Tropitone furniture. To order replacement slings from your local Tropitone Dealer or Representative, you will need to know the model numbers for the pieces you want to re-sling. Refer to your original sales receipt for this information. For instructions on sling replacement, click Seating under Product Care.

Fire

Tropitone leads the industry in it’s offering of Fire Pit and Fire Table models that are beautiful, functional and coordinate with our current product offering.  We offer a wide selection of options to enhance your table top cooking and entertaining experience.  But most importantly, safety was designed into each model. 

Proper and regular care of your Fire Pit and Fire Table will extend its life and enhance its beauty.  Product failure caused by a lack of reasonable and necessary care and maintenance is not covered by the product warranty.

Click on a title below to view PDF file:
To read PDF instructions, you may need the current version of Adobe Acrobat Reader, which can be downloaded at http://www.adobe.com.

PDF

• Troubleshooting Guide for Fire Pits and Fire Tables
• 2020 Outdoor Firepit Installation and Operating Instructions
• Fire Pit Installation and Operating Instructions with Igniter
• Fire Pit Installation and Operating Instructions without Igniter
• Fire Pit Natural Gas Conversion and Operating Instructions
• Fire Pit Riser Instructions
• Flame Guard Assembly Instructions
• Matrix Fire pit Installation and Operating Instructions
• 742367FP-18 and 742367FP-2 Instructions
• 762342FP-18 & 762342FP-24 Instructions

Safety

In order to fully enjoy your Tropitone® fire product, please be sure to read all documentation that is shipped with the product.

Fire pits and fire tables are designed and intended for outdoor use only. Never install or operate the fire pit or fire table indoors. Operating a fire pit or fire table indoors will result in a very dangerous condition.

When your fire pit or fire table is in operation, do not leave it unattended.

For further safety information, click on title above to view PDF file.

Frames

Regularly inspect and tighten all hardware to avoid loosening which can lead to hardware failure and product breakage. Replace missing hardware immediately (remove product from service until repaired).

Painted Finishes

Painted finishes are used on aluminum and cast aluminum Fire Pits and Fire Tables. Periodically clean the finish with a sponge or soft bristle brush using a cleaning solution with 1/4 cup (2 oz.) mild liquid soap in a gallon of lukewarm water (100° F / 38° C). Rinse thoroughly. Avoid using abrasive cleaners. For gloss finishes, we recommend periodic waxing of the frame with a high grade automotive paste wax or the use of a commercially available protectant to help maintain and/or restore the luster of the finish. Protectants can be purchased at most casual furniture retailers.

Do not apply any cleaners or waxes when the Fire Pit or Fire Table is in use.  Allow to fully cool before cleaning or waxing the product.  Be sure the Fire Pit or Fire Table is fully dry before turning it on.

Caution: In seaside use, salt can accumulate on the finish, leading to finish failure. Regular cleaning with mild soap and water will remove the concentrated deposits and protect the product finish per the above instructions.

Fuel and Fuel Components

For information regarding fuel and fuel components, click on title above to view PDF file.

Fire Media

The Fire Media that Tropitone® offers is heat resistant glass that is specifically manufactured for use with gas fire pits or fire tables.  Other variations of Fire Media, such as lava rock and lava stone, that are specifically manufactured for use with gas fire pits and fire tables may be used.

When placing Fire Pit Media in to the Burner Tray, it must be distributed evenly ensuring that the Blow Out Box or Pilot Opening is not covered. The Fire Media must not obstruct the flow of gas from the Burner Holes.  Please refer to the Fire Pit Installation Instructions for additional information.

The best flame results can be achieved with minimal or no coverage of the main Burner flame holes.

Glass Fire Media may be cleaned by carefully removing the media from the Fire Pit or Fire Table and rinsing it with water or a solution of 50% water and 50% vinegar.  After allowing the Fire Media to fully drain, place the Media back in to the Burner Tray.  Any Fire Pit Media that has become extremely dirty should be thrown away and replaced with new Media.

Safety

In our continuing effort to ensure that your experience with Tropitone furniture is positive with regard to comfort, quality and design, and also with regard to safety, please note the following important safety information, in addition to other safety information noted in this booklet.

SAFETY WARNING! Use of furniture needing care and maintenance or use of damaged furniture can result in injury. Also, minor repair issues can become major repair and service issues, and create potential safety issues. Contact your local Tropitone Dealer or Sales Representative for support.

PRODUCT INSPECTION

Periodically and carefully inspect all Tropitone products for breakage and/or indications of wear. Inspections must include, but not be limited to, spring assemblies and the weld areas of product seats, arms and legs. If any cracks should appear on the product or at welds, the item must immediately be removed from service until repaired.

Inspections must include all bolts (on seating pieces, tables, umbrellas, etc.). Should any loose or missing hardware be detected, the item must be removed from service immediately until the hardware can be properly tightened and/or replaced.

Inspections must include straps, slings and EZ Span™ segments. Should any loose, missing or damaged straps, slings or EZ Span™ segments be detected, the item must be removed from service immediately until repaired and/or replacement parts installed.

Inspections must include chaise lounge and recliner headrest ratchets. Periodically tighten the headrest bolts on all chaise lounges and recliners. Confirm all other hardware is tight, movement is smooth without binding, and that the ratchet engages properly at each position. At the same time, carefully inspect the headrest ratchets for breakage and/or wear. If headrest ratchet breakage and/or indications of headrest ratchet wear are present, a replacement headrest should be ordered. The furniture must immediately be removed from service until repaired and/or replacement parts installed.

To obtain replacement parts, please see the SERVICE / ORDERING PARTS AND ACCESSORIES.

Product failure caused by a lack of reasonable and necessary care and maintenance is not covered by the product warranty.

Notice for Commercial Installations
Periodically and carefully inspect all Tropitone products for breakage and/or indications of wear. Such inspections must include all products of a like kind and model, not merely a random sampling within model categories or among like products.

Regular random inspections of a sampling within model categories and among like products must be undertaken in addition to the periodic inspections of all products.

CHAISE LOUNGE AND RECLINERS

Chaise Lounge Headrest Ratchet Replacement
Tropitone’s chaise lounges are equipped with metal headrest ratchets which are welded in place and normally do not need replacement. If an older chaise lounge is equipped with nylon headrest ratchets, discontinue use of such chaise lounges immediately.

Consumers
Contact your local Tropitone Dealer for replacement.

Commercial Customers:
Contact your Tropitone Sales Representative (except for ratchets that have been retrofitted with a Tropitone "J" bracket retrofit kit).

Headrest Adjustment

SAFETY WARNING! Chaise lounge and recliner headrests must NEVER be adjusted while seated in the chaise. Serious finger, hand or other bodily injury may result from adjusting the headrest while seated. Headrests must always be adjusted while out of the furniture and standing to the side.

Notice for Commercial Installations
Include the following or substantially similar conspicuous written notice as part of the posted Rules and Regulations at poolside, and elsewhere wherever chaise lounges and recliners are available for use: "Never adjust chaise lounge or recliner headrests while seated. Serious finger, hand or other bodily injury may result from adjusting headrest while seated."

Consider also including such notice in the written material(s) provided to guests in connection with the availability and use of the guest amenities at your facility.

Windy Conditions

SAFETY WARNING! During windy conditions, chaise lounge and recliner headrests may be blown forward, possibly resulting in head, neck, facial, arm and/or back injuries. During windy conditions the headrests must be lowered to the fully down position. The use of the chaise lounges and recliners must be discontinued and users should leave the area.

Notice for Commercial Installations
Include the following or substantially similar conspicuous written notice as part of the posted Rules and Regulations at poolside, and elsewhere wherever chaise lounges and recliners are available for use: "During windy conditions, the use of the chaise lounges and recliners must be discontinued and users should leave the area."

Consider also including such notice in the written material(s) provided to guests in connection with the availability and use of the guest amenities at your facility.

UMBRELLAS AND BASES

Windy Conditions

SAFETY WARNING! All Tropitone umbrellas must always be closed and taken down in windy conditions.

When Not In Use
All Tropitone umbrellas should always be closed when not in use.

6100 UMBRELLA BASES AND TABLE UMBRELLA BASES

SAFETY WARNING! The 6100 Umbrella Base and Table Umbrella Bases must never be used in a free-standing application. Serious bodily injury and/or property damage may result. These umbrella Bases must only be used in conjunction with an in-table umbrella application. Secure the umbrella through the center of the dining table and fasten into the base with the set screw. The set screw must not be used to adjust the height of the umbrella.

In-Table Umbrella Bases — Minimum Weight
An umbrella base weighing 50 pounds or greater is required in connection with any in-table umbrella application.

Free-Standing Umbrella Bases
For any free-standing umbrella, use one of the Tropitone umbrella bases manufactured specifically for free-standing applications.

Seating

Tropitone Casual Furniture offers a wide variety of frame styles and finish colors combined with an outstanding variety of coordinating fabrics. The result is style, elegance and practicality delivering The Tropitone Difference.

Regular periodic care of your Tropitone furniture will maintain its appearance and functionality better than occasional, heavy duty maintenance. Consider the specific conditions and usage to which your product is exposed so appropriate maintenance is provided. Product failure caused by a lack of reasonable and necessary care and maintenance is not covered by the product warranty.

Click on a title below to view PDF or Video file:
To read PDF instructions, you may need the current version of Adobe Acrobat Reader, which can be downloaded at http://www.adobe.com.

Video

• How To Replace a Tropitone Sling

PDF

• Cabana Club Assembly Instructions
• Cabana Club Chaise Sling Replacement
• Cabana Club Cleaning and Care
• Cabana Club Party Lounger
• Cabana Club Aluminum Square Party Lounger Assembly Instructions
• Cabana Club Fabric & Woven Panel Assembly Instructions
• Chaise Shade Assembly Instructions
• Chaise Cup Holder Assembly Instructions
• Curve Chaise Use & Assembly Instructions
• Curve Lounge Chair Assembly Instructions
• Curve Party Lounge Assembly Instructions
• District Bench Assembly Instructions
• District Picnic Tables Assembly Instructions
• Evo Woven Assembly Instructions
• KOR Modular and Spanner Table Assembly Instructions
• Kenzo Modular Assembly Instructions
• Mia Assembly Instructions
• Muirlands Sectional Assembly Instructions
• Platform Assembly Instructions
• Radius Component Assembly
• Sling Chair Replacement Instructions

Frames

Regularly tighten all hardware to avoid loosening which can lead to bolt failure and product breakage. Replace missing hardware (remove product from service until repaired). Regularly tighten the headrest bolts on all chaise lounges and recliners. Confirm movement is smooth without binding and that the ratchet engages properly at each position.

Painted Finishes

Painted finishes are used on aluminum seating, tables and umbrellas. Periodically clean the finish with a sponge or soft bristle brush using a cleaning solution with 1/4 cup (2 oz.) mild liquid soap in a gallon of lukewarm water (100° F / 38° C). Rinse thoroughly. Avoid using abrasive cleaners. For gloss finishes, we recommend periodic waxing of the frame with a high grade automotive paste wax or the use of a commercially available protectant to help maintain and/or restore the luster of the finish. Protectants can be purchased at most casual furniture retailers.

Caution: In seaside use, salt can accumulate on the finish, leading to finish failure. In indoor pool areas, chlorides can accumulate on the finish, leading to finish failure. In both of these environments, repeated cycles of condensation followed by evaporation cause build-up of these aggressive corrosives. Regular cleaning with mild soap and water will remove the concentrated deposits and protect the furniture finish per the above instructions.

Fabric

The life of your patio furniture fabric largely depends on its care. Clean all spills promptly. Fabric life can be extended by simply rinsing down the patio furniture regularly with water. Certain suntan and sun block products may permanently discolor any fabric. This possibility can be minimized by immediately cleaning after contact. In addition, storing the cushions when not in use will extend cushion life.

Prepare a cleaning solution with 1/4 cup (2 oz.) mild liquid soap in a gallon of lukewarm water (no warmer than 100° F / 38° C). Clean fabric with the solution using a sponge or soft bristle brush. Rinse thoroughly with clean water. Allow to air dry.

Hint: Standing a cushion on its side will help it drain faster.

Caution: Certain suntan and sun block products contain "PABA". PABA is harmful to fabric and can permanently discolor it; therefore, contact with cushions or slings should be avoided. If contact is made, cleaning the fabric immediately with a non-abrasive, mild soap and water solution followed by a fresh water rinse may minimize the possibility of discoloration. Laying a beach towel over the cushions or slings of outdoor furniture whenever you are using the furniture will prolong the fabric life.

• Do not use a bleach solution unless specifically listed as a cleaning agent for the specific fabric, such as for solution dyed acrylics.
• Do not submerse or allow cushions to lie in standing water.
• Do not put cushions into the dryer.
• Do not use harsh detergents or stiff bristle brushes.
• Do not use Pine Oil cleaners or abrasive household cleaners.
• Do not use heat or hot water.

Mildew may form on dirt or other substances deposited upon the fabric. Regular cleaning of the furniture will help to prevent its forming. If mildew does develop, add 1 cup bleach to the cleaning solution. Apply to the affected area and allow to soak in. Scrub with a soft bristle brush, then rinse thoroughly. Repeat if necessary. For stubborn mildew stains, use a household mildew remover - test in an inconspicuous location first. FOLLOW THE MANUFACTURER’S INSTRUCTIONS.

Faux Leather

Clean all spills promptly. For a quick, easy clean up - use baby wipes. For general cleaning, see the instructions in the FABRIC section.

Straps, Lacing and EZ Span™ Segments

Vinyl straps, lacing and EZ Span™ segments must be cleaned frequently with a sponge or soft bristle brush using a cleaning solution with 1/4 cup (2 oz.) mild liquid soap in a gallon of lukewarm water (100° F / 38° C). Rinse thoroughly.

In geographical areas with high concentrations of acid rain, fog and/or smog, vinyl must be cleaned monthly with a lukewarm water and ammonia mixture. Use three parts water to one part ammonia. Rinse thoroughly.

For furniture with woven straps or lacing, be sure to lift and clean beneath the strap and/or lace intersections. Commercial casual furniture cleaners will help lift embedded dirt and oil from vinyl and are available at leading casual furniture dealers. EZ Span™ segments have a slight texture; the segments may be cleaned lightly with a non-scratch scrub sponge or soft bristle brush to lift embedded dirt.

Caution: Do NOT use abrasive cleaners on vinyl straps, lacing or EZ Span™ segments.

Caution: Certain suntan and sun block products contain "PABA". PABA is harmful to vinyl and can permanently discolor it; therefore, contact with vinyl straps or lacing should be avoided. If contact is made, cleaning the vinyl immediately with a non-abrasive, mild soap and water solution followed by a fresh water rinse may minimize the possibility of discoloration. Laying a beach towel over the vinyl straps of outdoor furniture whenever you are using the furniture will help protect the vinyl from the discoloring effects of PABA.

Woven Buckets

Clean all spills promptly. Follow the instructions in the FABRIC CLEANING AND CARE section.

Stainless Steel

Remove cushions, and accessory pillows to prevent staining of fabric, as cleaners used on stainless steel may not be appropriate for fabric. Unsnap back and seat cushions, by gently pulling the snap at the connection to the cushion. Stack on a clean and dry surface.

Apply a cleaning solution with 1/4 cup (2 oz.) mild liquid soap in a gallon of lukewarm water (100° F / 38° C) using a soft, clean cloth. Rub with the grain of the metal.

Rinse furniture thoroughly with clean water.

Dry thoroughly to prevent streaks, rubbing with the grain. Thorough rinsing and drying will remove detergent and allow the metal to "breathe", preventing corrosion.

Install seat cushions and snap into place. Install back cushions and snap into place. Notice corner module back cushions have a left and right back cushion. Replace accessory pillows.

Caution: Do NOT use the following products on stainless steel - damage may occur:

• Bleach or cleaners containing bleach (can corrode stainless steel)
• Hydrochloric acid or cleaners with chloride (can corrode stainless steel)
• Abrasive pads or cleaners (will scratch or polish finish)
• Rubbing motion against metal grain (can change finish)

Stainless Steel Stain or Rust Removal

Should a stain or rust occur on the stainless steel, promptly clean the deposit. Lingering stains can become permanent. Rust can permanently etch or pit the stainless steel.

Apply a non-abrasive stainless steel cleaner / polish. FOLLOW THE MANUFACTURER’S INSTRUCTIONS. Test in an inconspicuous spot to insure original finish isn’t altered. Remember to rub with the metal grain (not in a circular motion). Rinse furniture thoroughly with clean water. Finally, dry thoroughly to prevent streaks, rubbing with the grain.

If the stain or rust remains, you can use a Scotch-Brite® No Scratch Multi-Purpose Scrub Sponge or a Scotch-Brite® General Purpose Hand Pad 7447 to polish the stainless steel. It is critical to rub with the metal grain (not in a circular motion). Rinse furniture thoroughly with clean water. Finally, dry thoroughly to prevent streaks, rubbing with the grain.

Caution: Salt or acid (from coffee, wine, orange juice, tomato juice, lemon, etc) can discolor stainless steel if not cleaned up promptly.

Seaside / Indoor Pool areas: Stainless Steel products used in seaside or indoor pool settings will require more frequent cleaning to remove chloride deposits to prevent corrosion and etching.

Mobilis Polymer

The contemporary design is enhanced with a wide selection of fabrics and complemented by comfortable cushion design. Should the cushions become wet, remove cushions from the base and stand on end to allow to drain and dry. Wipe down the base deck surface to remove any residual water.

Remove cushions, bolsters, and throw pillows to prevent staining of fabric, as cleaners used on polymer resin furniture are not appropriate for fabric. Unsnap back and seat cushions, by gently pulling the snap at the connection to the cushion. Stack on a clean and dry surface.

Apply cleaning solution (Simple Green®, Mr. Clean®, or other non-abrasive multi-purpose cleaner) directly to heavily soiled areas. Using a mild scrub sponge, wipe the entire furniture surface. Heavily soiled areas can be scrubbed with the scouring pad or scrubbing sponge.

Rinse furniture thoroughly with clean water. Dry completely before installing cushions. Install seat cushions and snap into place. Install back cushions and snap into place. Replace bolsters and throw pillows.

Frames

All Tropitone extruded aluminum patio furniture frames feature a welded, all aluminum frame construction. Tropitone uses full circumference welding in all load bearing joints since it is the strongest way to join two pieces of aluminum.

Our Cast Collection features frames that are either solid cast aluminum or a combination of cast and extruded aluminum. Cast to extruded material connections have a deep penetrating weld design to insure superior strength. All aluminum construction enables Tropitone Cast Furniture to be used indoors and outdoors.

Click on a title below to view PDF or Video file:
To read PDF instructions, you may need the current version of Adobe Acrobat Reader, which can be downloaded at http://www.adobe.com.

Video

• How To Touch Up Tropitone® Frame Finishes

PDF

• Aluminum Surface Touch Up Instructions

CLEANING AND CARE

Regular periodic care of your Tropitone furniture will maintain its appearance and functionality better than occasional, heavy duty maintenance. Consider the specific conditions and usage to which your product is exposed so appropriate maintenance is provided. Product failure caused by a lack of reasonable and necessary care and maintenance is not covered by the product warranty.

Regularly tighten all hardware to avoid loosening which can lead to bolt failure and product breakage. Replace missing hardware (remove product from service until repaired). Regularly tighten the headrest bolts on all chaise lounges and recliners. Confirm movement is smooth without binding and that the ratchet engages properly at each position.

PAINTED FINISHES

Painted finishes are used on aluminum seating, tables and umbrellas. Periodically clean the finish with a sponge or soft bristle brush using a cleaning solution with 1/4 cup (2 oz.) mild liquid soap in a gallon of lukewarm water (100° F / 38° C). Rinse thoroughly. Avoid using abrasive cleaners. For gloss finishes, we recommend periodic waxing of the frame with a high grade automotive paste wax or the use of a commercially available protectant to help maintain and/or restore the luster of the finish. Protectants can be purchased at most casual furniture retailers.

Caution: In seaside use, salt can accumulate on the finish, leading to finish failure. In indoor pool areas, chlorides can accumulate on the finish, leading to finish failure. In both of these environments, repeated cycles of condensation followed by evaporation cause build-up of these aggressive corrosives. Regular cleaning with mild soap and water will remove the concentrated deposits and protect the furniture finish per the above instructions.

STAINLESS STEEL

Remove cushions, and accessory pillows to prevent staining of fabric, as cleaners used on stainless steel may not be appropriate for fabric. Unsnap back and seat cushions, by gently pulling the snap at the connection to the cushion. Stack on a clean and dry surface.

Apply a cleaning solution with 1/4 cup (2 oz.) mild liquid soap in a gallon of lukewarm water (100° F / 38° C) using a soft, clean cloth. Rub with the grain of the metal.

Rinse furniture thoroughly with clean water.

Dry thoroughly to prevent streaks, rubbing with the grain. Thorough rinsing and drying will remove detergent and allow the metal to “breathe”, preventing corrosion.

Install seat cushions and snap into place. Install back cushions and snap into place. Notice corner module back cushions have a left and right back cushion. Replace accessory pillows.

Caution: Do NOT use the following products on stainless steel - damage may occur:

• Bleach or cleaners containing bleach (can corrode stainless steel)
• Hydrochloric acid or cleaners with chloride (can corrode stainless steel)
• Abrasive pads or cleaners (will scratch or polish finish)
• Rubbing motion against metal grain (can change finish)

STAINLESS STEEL STAIN OR RUST REMOVAL

Should a stain or rust occur on the stainless steel, promptly clean the deposit. Lingering stains can become permanent. Rust can permanently etch or pit the stainless steel.

Apply a non-abrasive stainless steel cleaner / polish. FOLLOW THE MANUFACTURER’S INSTRUCTIONS. Test in an inconspicuous spot to insure original finish isn’t altered. Remember to rub with the metal grain (not in a circular motion). Rinse furniture thoroughly with clean water. Finally, dry thoroughly to prevent streaks, rubbing with the grain.

If the stain or rust remains, you can use a Scotch-Brite® No Scratch Multi-Purpose Scrub Sponge or a Scotch-Brite® General Purpose Hand Pad 7447 to polish the stainless steel. It is critical to rub with the metal grain (not in a circular motion). Rinse furniture thoroughly with clean water. Finally, dry thoroughly to prevent streaks, rubbing with the grain.

Caution: Salt or acid (from coffee, wine, orange juice, tomato juice, lemon, etc) can discolor stainless steel if not cleaned up promptly.

Seaside / Indoor Pool areas: Stainless Steel products used in seaside or indoor pool settings will require more frequent cleaning to remove chloride deposits to prevent corrosion and etching.

PAINT TOUCH UP

Tropitone offers touch up spray paint. Orders for paint may be placed with your local authorized Tropitone Dealer or commercial Sales Representative.

Small Nicks — Complete steps 1 — 5. Spray touch-up paint onto a flat plate or dish. Use a small artist's brush to transfer the paint from the plate to the aluminum outdoor patio furniture. Texture can be enhanced with a clean, dry brush after the paint becomes tacky.

Scratches in Textured Finish — After last coat in step 7 above, don’t let the paint fully dry. Wait 3 - 5 minutes for the paint to become tacky. Pat with a damp (not soaking) cloth to create texture (a dry cloth will pick up too much paint). Make sure the damp cloth is lint free.

REPAIRING SCRATCHES AND SCRAPES

Touch-up paint to match the frame color is available directly from your local Tropitone Dealer or Representative.

• Wash the scratched area to remove any dirt or grease.
• Rinse thoroughly with clean water. Dry.
• Remove cushions. Protect fabric, frame, and all surface areas that are not to be painted.
• Sand the scratch lightly to “soften” the edge with fine grit sandpaper so that the touch-up paint will blend in easily. Sand as small an area as possible so you don’t create additional work.
• Clean with rubbing alcohol.

TOUCHING UP GLOSS FINISHES

Do NOT try to get full coverage with the first coat.

• Hold the can 4 — 6 inches away from the surface to be painted. Apply the touch-up paint with short light sprays until complete coverage is obtained. Be sure to avoid “over-spraying” onto adjacent areas. Over-spray must be removed immediately using rubbing alcohol and a soft cloth.

TOUCHING UP TEXTURED FINISHES

Do NOT try to get full coverage with the first coat.

• Hold spray can 4 - 6 inches away from surface to be painted. Spray a thin coat and let dry.
• Spray a second coat and let dry. Repeat until desired coverage is achieved.

Caution: One heavy coat may cause the surrounding finish to loosen and wrinkle due to the solvents in the spray paint.

Caution: Trying to get full coverage in the first coat may result in a glossy surface. Should this happen, dull with a light (thin) coat applied after the offending glossy coat has dried.

• Certain colors require a second coat with a supplied "Step 2" spray paint. Hold the can 12 inches from the surface and use one quick pass. Allow to dry.
• Certain colors require a third coat with a supplied "Step 3" spray paint. Hold the can 12 inches from the surface and use one quick pass. Allow to dry.

Paint Storage Hint: Always flush the paint out of the nozzle after use by turning the can upside down and depressing the nozzle, spraying onto a disposable cloth. Store touch-up spray cans upside down as the nozzles are less likely to clog.

GLIDES AND END CAPS

Glides (often referred to as "nylon feet") are sometimes lost or become worn with use, and should be replaced when lost or worn for stability and safety. Replacement glides and end caps are available from your local Tropitone Dealer or Representative.

Certain nylon glides and end caps are available in various colors depending upon the frame color. When ordering replacement glides and end caps, please specify frame color. Replacement parts for older models may only be available in limited colors.

RIVETED NYLON GLIDES

Nylon glides that are riveted to the tubing can be replaced by drilling out the existing rivet and installing a new glide with a new pop rivet. A pop rivet tool or kit is available at most hardware stores.

RIVETED CUPS WITH NYLON CAPS

Your local Tropitone Dealer or Representative can supply either the replacement glides or a complete kit with cup, screw and nylon cap.

WELDED CUPS WITH NYLON CAPS

If the aluminum cup is worn or broken off, it can be replaced by drilling a pilot hole and using a self-tapping screw to hold the aluminum cup in place. A nylon cap snaps easily over this aluminum cup.

LEVELING

For Cast Aluminum Outdoor Furniture Products - All dining table legs and many other table legs have leveling glides which can be adjusted so the table will sit level. On other table and seating pieces, check that the glides (nylon feet) are properly seated and not worn. Replacement glides are available through your local Tropitone Dealer or Representative.

If a chair or small table sits unevenly on the floor, determine if the floor is flat by switching it with another piece in a different area. If the wobble moves with the piece, determine the "long" leg. Begin adjustment by placing a small block of wood on the floor under the long leg. Now, lift the chair and firmly bring it down so that long leg contacts the wood. This should adjust the longer leg. If there is serious unevenness that cannot be corrected, contact your local Tropitone Dealer or Representative.

LUBRICATION OF SWIVELS, WHEELS AND HINGES

Periodic lubrication with a silicon lubricant spray of all moving parts is recommended to extend the product life and minimize squeaks or noises. FOLLOW THE MANUFACTURER’S INSTRUCTIONS for use.

STACKING AND NESTING

Tropitone recommends that when moving or storing any stacking aluminum outdoor patio furniture it is stacked no more than the specific recommended stack heights for safety and to reduce the potential from rubbing, wear or marring of the frame finishes. Nesting furniture comes forward as it is stacked, therefore maximum nest height is especially critical as the stack could slide if the limit is exceeded. Contact your local Tropitone Dealer or Representative for stack quantity. Safety Warning! Do NOT sit on any furniture that is already stacked.

TIRE REPLACEMENT

Installing a new tire on chaise lounges or serving carts may be easier after soaking the tire in hot water for several minutes. Use tongs to remove it from the hot water and be sure to protect your hands with gloves when handling. Simply pull the old tire off and push the new tire on. Contact your local Tropitone Dealer or Representative for a replacement part.

WINTER STORAGE

Tropitone Furniture is intended to be used outdoors. In milder climates, the patio furniture can be left outdoors year-round. Each piece has drain holes built into the frame to minimize water build up. Caution: Do NOT store frames upside down. If you live in an area that experiences freezing conditions, store your clean and dry Tropitone outdoor furniture right side up in a dry, protected place. Water can collect and/or condense inside the frame tubing - if exposed to freezing temperatures, this water could freeze causing the frame tubing to crack or burst. This damage is NOT covered under your warranty.

Cleaning & Care

Regular periodic care of your Tropitone furniture will maintain its appearance and functionality better than occasional, heavy duty maintenance. Consider the specific conditions and usage to which your product is exposed so appropriate maintenance is provided. Product failure caused by a lack of reasonable and necessary care and maintenance is not covered by the product warranty.

Click on a title below to view PDF file:
To read PDF instructions, you may need the current version of Adobe Acrobat Reader, which can be downloaded at http://www.adobe.com.

PDF

• Cabana Club Cleaning and Care
• Curve and Radius Cleaning and Care
• Natural Stone Cleaning and Care
• Safety, Care, Maintenance And Warranty Information

Frames

Regularly tighten all hardware to avoid loosening which can lead to bolt failure and product breakage. Replace missing hardware (remove product from service until repaired). Regularly tighten the headrest bolts on all chaise lounges and recliners. Confirm movement is smooth without binding and that the ratchet engages properly at each position.

Painted Finishes

Painted finishes are used on aluminum seating, tables and umbrellas. Periodically clean the finish with a sponge or soft bristle brush using a cleaning solution with 1/4 cup (2 oz.) mild liquid soap in a gallon of lukewarm water (100° F / 38° C) . Rinse thoroughly. Avoid using abrasive cleaners. For gloss finishes, we recommend periodic waxing of the frame with a high grade automotive paste wax or the use of a commercially available protectant to help maintain and/or restore the luster of the finish. Protectants can be purchased at most casual furniture retailers.

Caution: In seaside use, salt can accumulate on the finish, leading to finish failure. In indoor pool areas, chlorides can accumulate on the finish, leading to finish failure. In both of these environments, repeated cycles of condensation followed by evaporation cause build-up of these aggressive corrosives. Regular cleaning with mild soap and water will remove the concentrated deposits and protect the furniture finish per the above instructions.

Fabric

The life of your patio furniture fabric largely depends on its care. Clean all spills promptly. Fabric life can be extended by simply rinsing down the patio furniture regularly with water. Certain suntan and sun block products may permanently discolor any fabric. This possibility can be minimized by immediately cleaning after contact. In addition, storing the cushions when not in use will extend cushion life.

Prepare a cleaning solution with 1/4 cup (2 oz.) mild liquid soap in a gallon of lukewarm water (no warmer than 100° F / 38° C). Clean fabric with the solution using a sponge or soft bristle brush. Rinse thoroughly with clean water. Allow to air dry.

Hint: Standing a cushion on its side will help it drain faster.

Caution: Certain suntan and sun block products contain "PABA". PABA is harmful to fabric and can permanently discolor it; therefore, contact with cushions or slings should be avoided. If contact is made, cleaning the fabric immediately with a non-abrasive, mild soap and water solution followed by a fresh water rinse may minimize the possibility of discoloration. Laying a beach towel over the cushions or slings of outdoor furniture whenever you are using the furniture will prolong the fabric life.

• Do not use a bleach solution unless specifically listed as a cleaning agent for the specific fabric, such as for solution dyed acrylics.
• Do not submerse or allow cushions to lie in standing water.
• Do not put cushions into the dryer.
• Do not use harsh detergents or stiff bristle brushes.
• Do not use Pine Oil cleaners or abrasive household cleaners.
• Do not use heat or hot water.

Mildew may form on dirt or other substances deposited upon the fabric. Regular cleaning of the furniture will help to prevent its forming. If mildew does develop, add 1 cup bleach to the cleaning solution. Apply to the affected area and allow to soak in. Scrub with a soft bristle brush, then rinse thoroughly. Repeat if necessary. For stubborn mildew stains, use a household mildew remover - test in an inconspicuous location first. FOLLOW THE MANUFACTURER’S INSTRUCTIONS.

Rope

For general or light cleaning, begin by vacuuming or brushing dirt off the rope. Apply a solution of mild detergent and warm water and allow it to soak in. Gently clean with a sponge or soft bristle brush, then rinse thoroughly with clear water and allow the material to air dry. Do not use stain removers. For heavy stains or spot cleaning use the same mild detergent and warm water mixture. Blot the stained area with a sponge or soft cloth working inwards from the outside of the stain. Do not rub it. Once the spot is removed rinse the area to remove any soap residue. Blot any excess moisture with a dry sponge or towel. Allow the material to air dry.

Faux Leather

Clean all spills promptly. For a quick, easy clean up - use baby wipes. For general cleaning, see the instructions in the FABRIC section.

Straps, Lacing and EZ Span™ Segments

Vinyl straps, lacing and EZ Span™ segments must be cleaned frequently with a sponge or soft bristle brush using a cleaning solution with 1/4 cup (2 oz.) mild liquid soap in a gallon of lukewarm water (100° F / 38° C). Rinse thoroughly.
In geographical areas with high concentrations of acid rain, fog and/or smog, vinyl must be cleaned monthly with a lukewarm water and ammonia mixture. Use three parts water to one part ammonia. Rinse thoroughly.
For furniture with woven straps or lacing, be sure to lift and clean beneath the strap and/or lace intersections. Commercial casual furniture cleaners will help lift embedded dirt and oil from vinyl and are available at leading casual furniture dealers. EZ Span™ segments have a slight texture; the segments may be cleaned lightly with a non-scratch scrub sponge or soft bristle brush to lift embedded dirt.

Caution: Do NOT use abrasive cleaners on vinyl straps, lacing or EZ Span™ segments.

Caution: Certain suntan and sun block products contain "PABA". PABA is harmful to vinyl and can permanently discolor it; therefore, contact with vinyl straps or lacing should be avoided. If contact is made, cleaning the vinyl immediately with a non-abrasive, mild soap and water solution followed by a fresh water rinse may minimize the possibility of discoloration. Laying a beach towel over the vinyl straps of outdoor furniture whenever you are using the furniture will help protect the vinyl from the discoloring effects of PABA.

Woven Buckets

Clean all spills promptly. Follow the instructions in the FABRIC CLEANING AND CARE section.

Stainless Steel

Remove cushions, and accessory pillows to prevent staining of fabric, as cleaners used on stainless steel may not be appropriate for fabric. Unsnap back and seat cushions, by gently pulling the snap at the connection to the cushion. Stack on a clean and dry surface.
Apply a cleaning solution with 1/4 cup (2 oz.) mild liquid soap in a gallon of lukewarm water (100° F / 38° C) using a soft, clean cloth. Rub with the grain of the metal.
Rinse furniture thoroughly with clean water.
Dry thoroughly to prevent streaks, rubbing with the grain. Thorough rinsing and drying will remove detergent and allow the metal to "breathe", preventing corrosion.
Install seat cushions and snap into place. Install back cushions and snap into place. Notice corner module back cushions have a left and right back cushion. Replace accessory pillows.

Caution: Do NOT use the following products on stainless steel - damage may occur:

• Bleach or cleaners containing bleach (can corrode stainless steel)
• Hydrochloric acid or cleaners with chloride (can corrode stainless steel)
• Abrasive pads or cleaners (will scratch or polish finish)
• Rubbing motion against metal grain (can change finish)

Stainless Steel Stain or Rust Removal

Should a stain or rust occur on the stainless steel, promptly clean the deposit. Lingering stains can become permanent. Rust can permanently etch or pit the stainless steel.

Apply a non-abrasive stainless steel cleaner / polish. Follow the manufacturer's instructions. Test in an inconspicuous spot to insure original finish isn’t altered. Remember to rub with the metal grain (not in a circular motion). Rinse furniture thoroughly with clean water. Finally, dry thoroughly to prevent streaks, rubbing with the grain.

If the stain or rust remains, you can use a Scotch-Brite® No Scratch Multi-Purpose Scrub Sponge or a Scotch-Brite® General Purpose Hand Pad 7447 to polish the stainless steel. It is critical to rub with the metal grain (not in a circular motion). Rinse furniture thoroughly with clean water. Finally, dry thoroughly to prevent streaks, rubbing with the grain.

Caution: Salt or acid (from coffee, wine, orange juice, tomato juice, lemon, etc) can discolor stainless steel if not cleaned up promptly.

Seaside / Indoor Pool areas: Stainless Steel products used in seaside or indoor pool settings will require more frequent cleaning to remove chloride deposits to prevent corrosion and etching.

Acrylic Table Tops

Avoid build-up of grease and stains by washing regularly with a cleaning solution with 1/4 cup (2 oz.) mild liquid soap in a gallon of lukewarm water (100° F / 38° C). Rinse thoroughly with clean water.

Hint: Occasional use of a high grade automotive paste wax will help keep the acrylic table looking new.

• Do not use window cleaners or products containing ammonia or solvents on acrylic tops.
• Do not use plastic covers over acrylic table tops. The resulting heat accumulation may cause the acrylic to bow.

Cast Aluminum Table Tops and Aluminum Frames

See Painted Finishes in the Cleaning and Care section.

Fiberglass Table Tops

Use a glass cleaner with ammonia.

Glass Table Tops

Use a glass cleaner with ammonia.

Stoneworks™ Solid Surface Table Tops

Avoid build-up of grease and stains by washing regularly with a non-abrasive sponge or soft bristle brush with a cleaning solution with 1/4 cup (2 oz.) mild liquid soap in a gallon of lukewarm water (100° F / 38° C). To release embedded dirt, use a vinegar and water solution (equal parts each). Rinse thoroughly with clean water.

Natural Stone Table Tops

Routine Care:

• Clean spills immediately
• Use a soft cloth to wipe stone
• Use coasters
• Only use products labeled for natural stone cleaning
• Protect stone surface from hot items

To clean granite, marble and travertine, apply the natural stone cleaner to the stone surface. FOLLOW THE MANUFACTURER’S INSTRUCTIONS.
Wipe off with a soft, absorbent cloth. For heavily soiled areas, allow cleaner to stand for about one minute before wiping off.

Caution: Alcohol or acid (from coffee, wine, orange juice, tomato juice, lemon, etc.) can etch stone sealer and natural stone if not cleaned up promptly. This will promote staining.

Caution: The following should NOT be used to clean natural stone - damage may occur:

• Bleach or cleaners with bleach
• Glass cleaners
• Vinegar
• Ammonia
• Cleaners containing lemon or orange
• Abrasive powders or liquids
• Scouring pad or scrubbing sponge

Note: If a detergent is used on stone surface, a soap film will develop. Clean with a stone cleaner to remove the soap film. If liquids darken or discolor the stone surface, sealer recoating is necessary immediately. See section below for more on Natural Stone Sealing.

Natural Stone Sealing

Sealing with quality stone care products will help to protect the granite, marble or travertine from absorbing liquids and staining. In a residential setting, sealing on a semi-annual (twice yearly) basis should be sufficient. In a commercial environment, more frequent sealing will be needed.

Sun exposure and other factors increase sealing frequency. If liquids darken or discolor the stone surface, sealer recoating is necessary immediately. Test by allowing water to remain for ten (10) minutes and observing the stone surface. If the stone darkens or absorbs the liquid, immediate sealing is needed.

FOLLOWING THE MANUFACTURER’S NATURAL STONE SEALER INSTRUCTIONS IS CRITICAL FOR GOOD RESULTS. Sealing with a penetrating (or impregnating) sealer will provide a protective coating to stand up to the daily use of stone cleaners, and normal exposure to liquids while minimizing opportunity for liquids and stains to penetrate the stone. Multiple coats of sealer may be needed on porous stone. Repeat penetrating sealer application until sealer isn’t absorbed by the stone.

When sealing the stone, protect stainless steel frames from the sealer. If the sealer contacts the stainless steel, immediately rinse the stainless steel with clean water, and dry thoroughly. Sealer will prevent the metal from “breathing”, and promote corrosion.
Should your natural stone incur a stain, contact a local stone resource for products and guidance regarding stain removal. Stain removal is difficult – in some cases, only fading of the stain will be achieved. It is far better to prevent stains with proper cleaning and sealing.

Teak Wood

Periodically clean teak with a sponge or soft bristle brush using a cleaning solution with 1/4 cup (2 oz.) mild liquid soap in a gallon of lukewarm water (100° F / 38° C). Rinse thoroughly.

Teak will naturally weather to a soft grey patina color over time when exposed to the elements. This process could take up to several years depending on your climate. If you desire this natural finish, do nothing to the teak furniture other than periodic cleaning described above.

Mildew may form on teak; regular cleaning of outdoor furniture will help to prevent its forming. If mildew does develop, add 1/4 cup bleach to the cleaning solution. Apply to the affected area and scrub with a soft bristle brush, then rinse thoroughly. Repeat if necessary.

Should you choose to retain the original look of teak, apply a high grade teak wood sealer before the product weathers. FOLLOW THE MANUFACTURER’S INSTRUCTIONS. Be aware sealing will become a periodic maintenance task. Some teak sealer manufacturers recommend applying teak oil prior to sealing, which can intensify the color and grain of the wood. If the teak has already weathered and you wish to restore the original finish, apply teak wood cleaner that is designed to restore weathered teak. Tropitone does not warranty the furniture finish when sealed or oiled. Always FOLLOW THE MANUFACTURER’S INSTRUCTIONS for application of oil, cleaner and sealer.

Caution: Do not get teak oil, teak sealer or teak cleaner on  the fabric.

Umbrellas

Always close market umbrellas and patio umbrellas in their stands when not in use. All Tropitone umbrellas must always be closed and removed from service in windy conditions to protect umbrellas against damage from inclement weather, and to protect persons from potential injury due to umbrellas toppling or moving in such conditions. If market umbrellas or patio umbrellas become wet, open for a complete airing and make certain they are thoroughly dry before closing.
Occasional lubrication of the moving parts of market umbrellas and patio umbrellas with a silicon lubricant spray is recommended.

Caution: Do NOT get lubricant on fabric or finish.

Aluminum Umbrella

If oxidation occurs, you may rub down the affected area with steel wool and follow up with a protective lubricant. Apply the protective lubricant, such as WD-40, to a cloth and then wipe onto the aluminum.

Caution: Do NOT get lubricant on fabric or finish.

Umbrella Fabric

Follow the instructions in the FABRIC CLEANING AND CARE section.

Umbrella Fiberglass Arms

Follow the instructions in the FABRIC CLEANING AND CARE section.

Umbrella Painted Finish

Care for the finish as noted in the PAINTED FINISHES CLEANING AND CARE section.

Umbrella Steel Base Plates

Steel base plates require regular cleaning and inspection, combined with prompt touch-up to scratches and nicks to help prevent rust from developing.

Should rust occur, use sandpaper to thoroughly remove any rust and apply a metal primer. FOLLOW THE MANUFACTURER'S INSTRUCTIONS for use. Then follow the instructions in the PAINTED FINISHES Touching Up Finishes section.

Wood Umbrella

Scrapes or scratches on wood poles may be touched up with a matching wood stain and covered with marine spar varnish. On an annual basis, lightly sand the exposed wood and varnish with a marine spar varnish. Teak umbrellas should be cared for as noted in the Teak Wood section.

Accessories

Click on a title below to view PDF file:

To read PDF instructions, you may need the current version of Adobe Acrobat Reader, which can be downloaded at http://www.adobe.com.

• MGP Accessory Lighting Instructions (PDF)
• MGP Tree/Lumi Lighting Instructions (PDF)
• R9T00054 Garden Planter Assembly Instructions

Service & Ordering

Customer Service / Ordering Parts And Accessories

To place an order or obtain service, you will need to know some basic information. Your original sales receipt will contain all the following:

• Model number(s) for your original product purchased
• Color code and Fabric number
• Original purchase date

CONSUMERS

Orders for parts and accessories may be placed with your local authorized Tropitone Dealer, who will assist with pricing and freight charges. Your service contact is also your Dealer. If you need to locate a dealer, see "Where to Buy" on our website at https://www.tropitone.com/where-to-buy for your local Dealer.

COMMERCIAL CLIENTS

Orders for parts and accessories may be placed with your Tropitone Sales Representative, who will assist with pricing and freight charges. Your service contact is also your Representative. If you need to locate a representative, see "Where to Buy" on our website at https://www.tropitone.com/where-to-buy for Commercial Sales Representatives.

DEALERS AND REPRESENTATIVES

All authorized returned merchandise must have a Return Goods Authorization (RGA) number. No merchandise is accepted without a valid RGA. Please fax or write the Tropitone Customer Service Department to obtain an RGA number. The RGA number must be clearly marked on all boxes to insure proper receipt and processing at Tropitone Furniture Company Inc., 5 Marconi, Irvine, CA 92618.

Umbrellas

Always close market umbrellas and patio umbrellas in their stands when not in use. All Tropitone umbrellas must always be closed and removed from service in windy conditions to protect umbrellas against damage from inclement weather, and to protect persons from potential injury due to umbrellas toppling or moving in such conditions. If market umbrellas or patio umbrellas become wet, open for a complete airing and make certain they are thoroughly dry before closing.

Occasional lubrication of the moving parts of market umbrellas and patio umbrellas with a silicon lubricant spray is recommended.

Caution: Do NOT get lubricant on fabric or finish.

Click on a title below to view PDF or Video file:
To read PDF instructions, you may need the current version of Adobe Acrobat Reader, which can be downloaded at http://www.adobe.com.

Video

• How To Assemble a Tropitone® Aluminum Cabana

PDF

• Cabana / Pavilion Assembly - Aluminum Frame Model Instructions
• Cabana / Pavilion Aluminum Ceiling Fan Mount Assembly
• Cabana / Pavilion HD Mount Bracket Assembly
• Cabana / Pavilion Light Kit Installation Instructions
• Cantilever Umbrella Assembly Instructions
• Cast Pedestal Umbrella / Table Base Assembly Instructions
• Chaise Shade Assembly Instructions (Round Sling Rail Extrusion)
• Cantilever Surface Mount Assembly Instructions
• In-Ground Gopher Sleeve Installation Instructions
• Umbrella Base Assembly
• Umbrella Replacement Part Instructions - Aluminum
• Umbrella Dolly Instructions

 
Aluminum Umbrella

If oxidation occurs, you may rub down the affected area with steel wool and follow up with a protective lubricant. Apply the protective lubricant, such as WD-40, to a cloth and then wipe onto the aluminum. Caution: Do NOT get lubricant on fabric or finish.

Fabric

Follow the instructions in the CLEANING AND CARE -- FABRIC section.

Fiberglass Arms

Follow the instructions in the CLEANING AND CARE -- FIBERGLASS ARMS section.

Painted Finish

Follow the instructions in the CLEANING AND CARE -- PAINTED FINISHES section.

Steel Base Plates

Steel base plates require regular cleaning and inspection, combined with prompt touch-up to scratches and nicks to help prevent rust from developing.

Should rust occur, use sandpaper to thoroughly remove any rust and apply a metal primer. FOLLOW THE MANUFACTURERS'S INSTRUCTIONS. Then follow the instructions in the CLEANING AND CARE -- PAINTED FINISHES Touching Up Finishes section.

Wooden Umbrella

Scrapes or scratches on wooden poles may be touched up with a matching wood stain and covered with marine spar varnish. On an annual basis, lightly sand the exposed wood and varnish with a marine spar varnish. Teak umbrellas should be cared for as noted in the CLEANING AND CARE -- TEAK WOOD section.

Umbrella Hole Grommets

Any table top with an umbrella hole should have a grommet; acrylic tops must use a vinyl grommet around the circumference of the hole to protect it from breakage. Umbrella hole grommets are available from your local Tropitone Dealer or Representative.

Replacement Parts

Tropitone offers accessories and replacement parts for current and many discontinued umbrella styles, such as hubs, arms, light kits, etc. You may select new fabric from our extensive fabric offering, or we can use your own material to recover your umbrella. Contact your local Tropitone Dealer or Representative for accessory and part availability, fabric selection and pricing. You will need to know the model numbers for your umbrella. Refer to your original sales receipt for this information.

Storage

Always allow market umbrellas and patio umbrellas to dry completely before storing and fold carefully to avoid wrinkling the fabric. Protect with a cover and lay on a hard, flat surface in a well-ventilated location.

How To Touch Up Tropitone® Frame Finishes
Step-by-step video instructions on how to touch up Tropitone Finishes.

How To Touch Up a Tropitone® Stoneworks® Table Top
Step-by-step video instructions on how to touch up the finish of a Tropitone® Stoneworks® Table Top.

How To Replace a Tropitone® One Piece Sling (Dining Chair)
This step-by-step guide demonstrates how to replace a one piece sling in a dining chair.

How To Replace a Tropitone® Relaxed Sling (Dining Chair)
This step-by-step guide shows how to replace a relaxed sling in a Tropitone® Dining Chair.

How To Replace Glides on a Tropitone® Dining Chair
This in-depth video explains how to replace glides on Tropitone® Dining Chairs.

How To Replace a Tropitone® Relaxed Sling (Chaise Lounge)
Learn how to replace a relaxed sling on a Tropitone® Chaise Lounge.

How To Replace a Tropitone® Table Top
Learn how to replace acrylic, glass, patterned aluminum, and HPL table tops.

How To Replace Tropitone® FIT upholstery cover
Learn how to replace a Tropitone® FIT upholstery cover.

How To Assemble a Tropitone® Aluminum Cabana
This step-by-step guide video demonstrates how to assemble a Basta Sole® Cabana.

How To Assemble Tropitone® Cabana Club modular pieces
This detailed video demonstrates how to assemble Tropitone® Cabana Club modular pieces.

How To Assemble a Tropitone® KD Table
This step-by-step guide demonstrates how to assemble a Tropitone® KD Table Top and Base

How To Install Tropitone® EZ Span™ Dining Chair Segments
This step-by-step guide demonstrates how to insert EZ Span™ segments into a Tropitone® EZ Span™ Chair.

How To Remove Tropitone® EZ Span™ Dining Chair Segments
This step-by-step guide demonstrates how to remove EZ Span™ segments from a Tropitone EZ Span™ Chair.

How To Install a Tropitone® EZ Span™ Accent Segment
This step-by-step guide demonstrates how to install an accent segment into a Tropitone EZ Span™ Dining Chair.